Skip to main content

Part 5 – Adjusting Firewall (iptables)

Adjusting Firewall rules

Everything regarding the Wireguard VPN should be configured:

  • Wireguard tunnel between a server and 2 peers (clients)
  • Services running on the Wireguard interface only (Nginx)
  • Correct DNS resolving for both the server and Android client

Now it's time to fix the Firewall, so what are our goals here?

  • DROP everything except:
    • HTTP/S and DNS on Wireguard interface
    • Ping on all interfaces
    • SSH on Wireguard interface only (later, since SSH is our only access to the VPS and breaking it would cause immense headache)

I am using very powerful iptables with iptables-restore utility to write my rules to a config file instead to the command line. The config file is located in /etc/iptables/rules.v4 (may be different in your case).

Open the file and edit it. Everything will be explained in the following code block behind #. For easier reading, I have divided it into parts:

Setup the 3 main chains – INPUT, OUTPUT and FORWARD. It is recommended to always set INPUT as implicit DENY and only whitelist approved services and ports.

*filter
# CONFIGURE INPUT, OUTPUT AND FORWARD CHAINS
# Drop forwarded traffic, we don't need that since we are not acting as a router
:FORWARD DROP [0:0]

# Accept all outgoing connections
:OUTPUT ACCEPT [0:0]

# Block all incoming traffic (default DENY)
:INPUT DROP [0:0]

When everything is blocked by default, these rules have to exist to allow communication on localhost and any established connections (when you initiace connection from the server)

# BASIC RULES FOR THINGS TO WORK WITH DEFAULT DENY ON INPUT CHAIN
# Do not block localhost traffic to itself
-A INPUT -i lo -j ACCEPT

# Allow established and related incoming connections
-A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT

Rules to allow devices within the Wireguard tunnel to access web services (ports 80 and 443) + 53 for DNS.

# WIREGUARD INTERFACE CONFIG
# Allow web traffic for my search engine (only on the Wireguard interface)
-A INPUT -p tcp -m tcp --dport 80 -i wg0 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 443 -i wg0 -j ACCEPT

# Allow DNS queries on the Wireguard interface
-A INPUT -p udp -m udp --dport 53 -i wg0 -j ACCEPT

Rules for the public IP of the server. The only thing that needs to be open is the Wireguard port. You can also configure the server to accept ICMP ping requests for easier troubleshooting. Without this rule, the server won't be "pingable" even if it's up.

# PUBLIC IP RULES
# Allow ICMP pings on all interfaces (for easier troubleshooting)
-A INPUT -p icmp --icmp-type echo-request -j ACCEPT

# Allow Wireguard on the public IP
-A INPUT -p udp -m udp --dport 51895 -i eth0 -j ACCEPT

SSH is the most critical service and therefore will still be available on all interface and I will move it to the Wireguard interface after testing.

# SSH
# Allow SSH on the port that it's running on
-A INPUT -p tcp -m tcp --dport 7985 -j ACCEPT

# Commit rules
COMMIT

The entire config looks like this:

*filter
# CONFIGURE INPUT, OUTPUT AND FORWARD CHAINS
# Drop forwarded traffic, we don't need that since we are not acting as a router
:FORWARD DROP [0:0]

# Accept all outgoing connections
:OUTPUT ACCEPT [0:0]

# Block all incoming traffic (default DENY)
:INPUT DROP [0:0]

# BASIC RULES FOR THINGS TO WORK WITH DEFAULT DENY ON INPUT CHAIN
# Do not block localhost traffic to itself
-A INPUT -i lo -j ACCEPT

# Allow established and related incoming connections
-A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT

# WIREGUARD INTERFACE CONFIG
# Allow web traffic for my websites (only on the Wireguard interface)
-A INPUT -p tcp -m tcp --dport 80 -i wg0 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 443 -i wg0 -j ACCEPT

# Allow DNS queries on the Wireguard interface
-A INPUT -p udp -m udp --dport 53 -i wg0 -j ACCEPT

# PUBLIC IP RULES
# Allow ICMP pings on all interfaces (for easier troubleshooting)
-A INPUT -p icmp --icmp-type echo-request -j ACCEPT

# Allow Wireguard on the public IP
-A INPUT -p udp -m udp --dport 51895 -j ACCEPT

# SSH
# Allow SSH on the port that it's running on
-A INPUT -p tcp -m tcp --dport 7985 -j ACCEPT

# Commit rules
COMMIT

Apply the configuration with iptables-restore. First make sure all rules make sense to you.

$ sudo iptables-restore /etc/iptables/rules.v4

List and check the rules (-n to not resolve DNS and -v for verbose output)

$ sudo iptables -L -nv

Chain INPUT (policy DROP 32 packets, 1941 bytes)
 pkts bytes target     prot opt in     out     source               destination
    0     0 ACCEPT     all  --  lo     *       0.0.0.0/0            0.0.0.0/0
   47  2876 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0            ctstate RELATED,ESTABLISHED
    0     0 ACCEPT     tcp  --  wg0    *       0.0.0.0/0            0.0.0.0/0            tcp dpt:80
    0     0 ACCEPT     tcp  --  wg0    *       0.0.0.0/0            0.0.0.0/0            tcp dpt:443
    0     0 ACCEPT     udp  --  wg0    *       0.0.0.0/0            0.0.0.0/0            udp dpt:53
    2   168 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0            icmptype 8
    0     0 ACCEPT     udp  --  *      *       0.0.0.0/0            0.0.0.0/0            udp dpt:51895
    0     0 ACCEPT     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0            tcp dpt:7985

Chain FORWARD (policy DROP 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination

Chain OUTPUT (policy ACCEPT 34 packets, 5056 bytes)
 pkts bytes target     prot opt in     out     source               destination
No Comments
Back to top